MOSweb Online!

Leslie Model 130

Ted Thompson — Sat, 18 Feb 2012 16:35:36 +0000

Single channel, single rotor cabinet with internal amplification. This cabinet is somewhat odd in that in addition to it’s 12″ rotor speaker there is also a stationary tweeter on the rotary channel.

According to the manual, the 12″ speaker handles frequencies below 400 hz and the tweeter handles frequencies above 4000hz – leading to the conclusion that between 400 and 4000 hz there is a gradual transition between the two.

The crossover could be bypassed however making this essentially the same as a 125 cabinet, but with solid state amplification.

Speakeasy Roadbox SE147MkII

Ted Thompson — Thu, 05 May 2011 01:31:21 +0000

Next step up following the exhaustion of their supply of 25 and 125 cabinet, the MkII was a replica of the slightly larger 142/145 size cabinet. Covered in a polymeric coating of the same material used for pickup truck bed … Continue reading →

Speakeasy Roadbox SE122MkII

Ted Thompson — Thu, 05 May 2011 01:30:24 +0000

Speakeasy Roadbox MkII

Ted Thompson — Thu, 05 May 2011 01:22:34 +0000

Speakeasy Roadbox

Ted Thompson — Thu, 05 May 2011 01:17:41 +0000

Original Roadbox from Speakeasy, built from a converted 25 or 125 Leslie. They added handles, an upper shelf, and horn. They also replaced the amplifier and crossover to create either a 122 type or 147 type cabinet. I have it listed as … Continue reading →

Leslie Model 204

Ted Thompson — Wed, 04 May 2011 15:46:41 +0000

Special model made exclusively for use with the model CP (AKA F204) Gulbransen console. Tibia channel switched between one 6×9 in the lower drum and a stationary 6×9. Complex channel switched between two 5x7s in the upper drum, and a … Continue reading →

Leslie Model 201

Ted Thompson — Wed, 04 May 2011 15:38:26 +0000

Special model made exclusively for use with the Gulbransen Model F Church Organ (great and swell manuals – one cabinet for each). Isomonically split and phase-mixed complex voices were carried by four channels via stationary 10″ speakers. Flute channel was a 10″ speaker firing into a wooden lower rotor (brake/fast).

The cabinet had 5 channels of Tube amplification (one 4-channel 100GK amp and a separate single-channel flute amp) — Special Thanks to Jimmy Williams for the information.

Leslie Model 200

Ted Thompson — Wed, 04 May 2011 15:29:04 +0000

Special model made exclusively for use with the Gulbransen Model F Church Organ (pedal channel). One single 15″ speaker; no rotary elements. — Special thanks to Jimmy Williams for the information.

Hammond Model QR-40

Ted Thompson — Wed, 02 Mar 2011 05:02:27 +0000

(In production February 1959 to ???)

Equipped with two 15″ speakers for bass tones and two 12″ speakers for the treble tones. They provide three dimension amplification which creates a beautiful reverberation effect in stereo. These cabinets feature the new and improved Hammond reverberation control for both bass and treble tones. Convenient outside controls make it easy to change the degree of reverberation for each.

The QR-40 is electrically similar to the PR-40 but with utility type cabinet is only used where appearance is not a consideration such as tone and reverberation chambers.

The treble direct speaker is normally mounted in the top. In unusual installations where the ceiling is very low, or cabinets are stacked or radiation is otherwise restricted, it is possible to move this speaker to the hole provided in the front. The metal diffuser in front of the speaker must also be moved and the wooden cover must be attached under the top to close the hole.

Finish	Walnut – Oak - Cherry
Dimensions	36-5/8″ High, 31″ Wide, 17-1/4″ Deep
Weight	121bs

Hammond Model PR-40

Ted Thompson — Wed, 02 Mar 2011 04:58:01 +0000

(In production February 1959 to ???)

Finish	Walnut – Oak - Cherry
Dimensions	36-5/8″ High, 31″ Wide, 17-1/4″ Deep
Weight	121bs