Having never seen one, the information to the right, the photo, and the review below come from Paul Strange of the UK. Few if any were sold in the USA. “This model – a portable and powerful Nihon-Hammond solid-state Leslie using a slightly modified 122 horn and simulated bass rotor – was introduced in the […]
Similar to the Model 310 it had the same sound system, packaged in a furniture finished cabinet. Few if any were sold in the USA. Amplifier Type Solid State Output Power 200 Watts total Drum None Horn 1 – Compression Driver Speeds 3 Speed (Chorale/Stop/Tremolo) Interface 11 Pin
The 315 is an older “Pro-Line” cabinet, meant for road applications. It has both rotary and stationary channels, and is packaged in a road cabinet with castors and handles to make it more portable. Amplifier Type Solid State Output Power 140 Watts Drum Rotosonic Horn 1 – Compression Driver Speeds 3 Speed (Chorale/Stop/Tremolo) Interface 11 […]
This is a smaller version of the 760, and intended for use with a combo preamp. Some organs, especially today, already have a Leslie connector built in and can connect directly to this Leslie’s 11 pin connector. Amplifier Type Solid State Output Power 60 Watts Drum 1 – 15″ Speaker Horn 1 – Compression Driver […]
The 412 is a profession type cabinet meant to be used “on the road”. It features 1 rotary and 2 stationary channels and an 11 pin interface. (See also Model 412J.) Amplifier Type Solid State Output Power Drum Rotosonic Horn 1 – Compression Driver Speeds 3 Speed (Chorale/Stop/Tremolo) Interface 11 Pin
The 412J is the same as the 412 functionally, but internally it is *very* different. This cabinet, which was made in Japan, has NO parts that are interchangeable with a 412 (which was US made). Amplifier Type Solid State Output Power Drum Rotosonic Horn 1 – Compression Driver Speeds 3 Speed (Chorale/Stop/Tremolo) Interface 11 Pin
The 415 is an adaptation of the HL-422 cabinet. This model has both stationary and rotary channels an it is intended for use with most 2 channel organs, through the appropriate connector kit. The HL-422 was originally sold only with B3000 organs and has coners that match the B3000 cabinet. The 415 is the same […]
This model was designed to be used on 3 channel organs, with the appropriate console connector kit. The 615 features 2 rotors and a total of 8 speakers, including 2 actual tweeters on the stationary channels. This is a vast improvement over earlier models which had only 6x9s in their “keyboard” channels, this model still […]
The 715, 815, HL-722, and HL-822 are all deviations of the same “guts” – each model simply bearing a different cabinet. The service manual and parts are the same for all four models. This model was designed to be used on 2 channel organs, with the appropriate console connector kit. The 715 is a high […]
This model was designed to be used on 2 channel organs, with the appropriate console connector kit. The 720 is a medium power cabinet with a normal drum and horn in it’s rotary channel, and a two way full range stationary channel. While better suited to having low frequencies in it’s rotary channel due to […]
2 Channel Pro-Line cabinet reportedly similar to the model 720. Amplifier Type Solid State Output Power 90 Watts ? Drum 1 – 10″ Speaker Horn 1 – Compression Driver Speeds 3 Speed (Chorale/Stop/Tremolo) Interface 11 Pin
This model was designed to be used on multichannel organs, with the appropriate console connector kit. The 740 is a high power cabinet with a normal Rotosonic drum and horn in it’s rotary channel, two way full range stationary channel, and two auxiliary channels. Amplifier Type Solid State Output Power 220 Watts total across 4 […]
The 715, 815, HL-722, and HL-822 are all deviations of the same “guts” – each model simply bearing a different cabinet. The service manual and parts are the same for all four models. This model was designed to be used with a combo preamp for portable organs and keyboards. It features both a rotary channel […]
The 860 is a single channel Leslie with solid-state amplifiers in a Pro-Line portable cabinet. This model was designed to be used with a combo preamp for portable organs and keyboards and was marketed on the basis that one would use several on stage – “add as many as you need to give you the […]
The HL-422 was made exclusively for use with the Hammond B3000. Amplifier Type Solid State Output Power 140 Watts total Drum Rotosonic Horn 1 – Compression Driver Speeds 3 Speed (Chorale/Stop/Tremolo) Interface 11 Pin
The 715, 815, HL-722, and HL-822 are all deviations of the same “guts” – each model simply bearing a different cabinet. The service manual and parts are the same for all four models. This model was designed to be used with the Hammond B-3000 organ, as it’s cabinet matches the B-3000’s case. Amplifier Type Solid […]
The 715, 815, HL-722, and HL-822 are all deviations of the same “guts” – each model simply bearing a different cabinet. The service manual and parts are the same for all four models. This model was designed to be used with the Hammond B-200 organ. It is the same internally as a model 715 but […]