This is a small single drum single speed Leslie with a 12″ driver. The cabinet is about the same size as a 145 but has no upper horn and hence no upper louvers. This model was made for use with almost any monaural organ, when connected via the appropriate connector kit. **BE CAREFUL This model […]
This model was made specifically for the unbalanced output of a Wurlitzer console, although it could be adapted to many other manufacturer’s organs with a “Console Connector Kit”. It is interesting to note that unlike later cabinets, this cabinet featured an ELECTRO-dynamic speaker. What this meant is that the 15″ woofer did not have a […]
The model 44W was made for Wurlitzer organs, although, as with all the other “Wurlitzer” cabinets, it could be used on almost any monaural organ with the appropriate connector kit. The 15″ woofer in the cabinet is most likely ELECTRO-dynamic. Please see the model 21H page for details on this type of woofer. Amplifier Type […]
Like a 44W this cabinet is 33″ in height, it uses a 47 type amplifier and is quite simply a short model 47. This cabinet is considered to be “Universal” because it can be attached to almost any monaural organ with the appropriate connector kit. Because of it’s cabinet dimensions it has slightly less bass […]
This cabinet was designed for use with Wurlitzer organs, but like the other “Wurlitzer” cabinets, it can be attached to almost any monaural organ with the appropriate connector kit. Amplifier Type 1 Channel Vacuum Tube Output Power 20 Watts Drum 1 – 15″ Speaker Horn 1 – Compression Driver Speeds 1 Speed (Stop/Tremolo) Interface 6 […]
This cabinet was designed for use with Wurlitzer organs, but like the other “Wurlitzer” cabinets, it can be attached to almost any monaural organ with the appropriate connector kit. This cabinet replaced the 46W and represents an advance in amplifier design. Amplifier Type 1 Channel Vacuum Tube Output Power 35 Watts Drum 1 – 15″ […]
See model 47 for specifications. The 47R is exactly the same as a 47 except it was built with the necessary cabinetry to accept a Hammond ETK reverb kit. Amplifier Type 1 Channel Vacuum Tube Output Power 35 Watts Drum 1 – 15″ Speaker Horn 1 – Compression Driver Speeds 1 Speed (Stop/Tremolo) Interface 6 […]