This model is actually comprised of a pair of cabinets, each with the appearance of the image to the left. This model is designed for use with most amplified instruments, but mainly for electro-pianos (IE Rhodes, Wurlitzer) It has no rotors, but does features variable vibrato speed. It uses a “Space Generator” to create this […]
This model is actually comprised of a pair of cabinets, each with the appearance of the image to the left. This model is designed for use with 2 channel organs and electro-pianos (IE Rhodes, Wurlitzer) It has no rotors, but does features variable vibrato speed. It uses a “Space Generator” to create this effect, and […]
Single channel, single rotor cabinet with internal amplification. This cabinet is somewhat odd in that in addition to it’s 12″ rotor speaker there is also a stationary tweeter on the rotary channel. According to the manual, the 12″ speaker handles frequencies below 400 hz and the tweeter handles frequencies above 4000hz – leading to the […]
The 212S was designed exclusively for use with Wurlitzer organs. As such it has some unusual speed and channel switching schemes. One rotor is set up for fast speed, while the other can be switched from fast to slow. These controls are semi-integrated with some channel switching as well as a “Space Generator”. It is […]
Having never seen one, the information to the right, the photo, and the review below come from Paul Strange of the UK. Few if any were sold in the USA. “This model – a portable and powerful Nihon-Hammond solid-state Leslie using a slightly modified 122 horn and simulated bass rotor – was introduced in the […]
Similar to the Model 310 it had the same sound system, packaged in a furniture finished cabinet. Few if any were sold in the USA. Amplifier Type Solid State Output Power 200 Watts total Drum None Horn 1 – Compression Driver Speeds 3 Speed (Chorale/Stop/Tremolo) Interface 11 Pin
The 315 is an older “Pro-Line” cabinet, meant for road applications. It has both rotary and stationary channels, and is packaged in a road cabinet with castors and handles to make it more portable. Amplifier Type Solid State Output Power 140 Watts Drum Rotosonic Horn 1 – Compression Driver Speeds 3 Speed (Chorale/Stop/Tremolo) Interface 11 […]
This is a smaller version of the 760, and intended for use with a combo preamp. Some organs, especially today, already have a Leslie connector built in and can connect directly to this Leslie’s 11 pin connector. Amplifier Type Solid State Output Power 60 Watts Drum 1 – 15″ Speaker Horn 1 – Compression Driver […]
The 412 is a profession type cabinet meant to be used “on the road”. It features 1 rotary and 2 stationary channels and an 11 pin interface. (See also Model 412J.) Amplifier Type Solid State Output Power Drum Rotosonic Horn 1 – Compression Driver Speeds 3 Speed (Chorale/Stop/Tremolo) Interface 11 Pin
The 412J is the same as the 412 functionally, but internally it is *very* different. This cabinet, which was made in Japan, has NO parts that are interchangeable with a 412 (which was US made). Amplifier Type Solid State Output Power Drum Rotosonic Horn 1 – Compression Driver Speeds 3 Speed (Chorale/Stop/Tremolo) Interface 11 Pin
The 415 is an adaptation of the HL-422 cabinet. This model has both stationary and rotary channels an it is intended for use with most 2 channel organs, through the appropriate connector kit. The HL-422 was originally sold only with B3000 organs and has coners that match the B3000 cabinet. The 415 is the same […]
This model is a 2 way speaker system for audiophiles, and comes with two cabinets like the one shown. The system is basically a high quality stereo speaker cabinet with a slow speed rotor on the woofer. In addition there is a “Space Generator” on the midrange and treble. Collectively the 430 / 450 / […]
This model is a 2 way speaker system for audiophiles, and comes with two cabinets like the one shown. The system is basically a high quality stereo speaker cabinet with a slow speed rotor on the woofer. In addition there is a “Space Generator” on the midrange and treble. Collectively the 430 / 450 / […]
This model is a 2 way speaker system for audiophiles, and comes with two cabinets like the one shown. The system is basically a high quality stereo speaker cabinet with a slow speed rotor on the woofer. In addition there is a “Space Generator” on the midrange and treble. Collectively the 430 / 450 / […]
This is basically a model 310 turned sideways with it’s rotor removed. It’s service manual is combined with the 310 and the speaker and amplfier components are shared with that model. This cabinet has NO rotational effects what so ever, and is simply a self powered PA cabinet with instrument level input, volume, treble, and […]
This cabinet was intended to be used as an add on for Leslie models 315, 415, HL-422, 715, and HL-722. It’s purpose was to add additional channels to the above named models when the organ had more then 2 channels. It has only 2 6×9 speakers, and rejects any frequencies below 100hz. Amplifier Type Solid […]
This model is a 2 channel cabinet, and has no rotors and no other modifying effects. It is basically an amplified stereo cabinet. This cabinet was intended for organs with “Phase Shift” Tremulants. These organs have a stereo tremulant which attempts to simulate a Leslie’s rotating speaker. Amplifier Type Solid State Output Power 45 Watts […]
This model is a 2 channel cabinet, and has no rotors and no other modifying effects. It is basically an amplified stereo cabinet. Typically seen teamed with a 520, this cabinet was intended for organs with “Phase Shift” Tremulants. These organs have a stereo tremulant which attempts to simulate a Leslie’s rotating speaker. Amplifier Type […]
This model was designed to be used on many different manufacturer’s organs, with the appropriate console connector kit. The 600 features a rotary channel, a stationary channel, and 2 auxiliary channels. The latter of which are routed through a “Space Generator” which provides a random motion effect call “Multi-Rank Effect” The cabinet also has the […]
This model was designed to be used on 3 channel organs, with the appropriate console connector kit. The 615 features 2 rotors and a total of 8 speakers, including 2 actual tweeters on the stationary channels. This is a vast improvement over earlier models which had only 6x9s in their “keyboard” channels, this model still […]
This model was designed to be used on 2 channel organs, with the appropriate console connector kit. The 610 features a normal Rotosonic drum and a full range stationary channel. The Rotosonic drum can not handle low frequencies, so a crossover or highpass filter must be used when connecting this model to anything that doesn’t […]
This model was designed to be used on 2 channel organs, with the appropriate console connector kit. The 705 features a normal Rotosonic drum and a full range stationary channel. It is more or less a 700 with an 11 pin interface. Amplifier Type Solid State Output Power 90 Watts total Drum Rotosonic Horn None […]
The 705C is the same as the 705 but in “Church” style cabinetry. Amplifier Type Solid State Output Power 90 Watts total Drum Rotosonic Horn None Speeds 3 Speed (Chorale/Stop/Tremolo) Interface 11 Pin
This model was designed to be used on various 2 channel organs, with the appropriate console connector kit. The 710 features a normal Rotosonic drum and horn in it’s rotary channel, and a two way full range stationary channel. As with the 700, 705, and 705C the rotary channel can’t handle low frequencies. Therefore, a […]
The 715, 815, HL-722, and HL-822 are all deviations of the same “guts” – each model simply bearing a different cabinet. The service manual and parts are the same for all four models. This model was designed to be used on 2 channel organs, with the appropriate console connector kit. The 715 is a high […]
This model was designed to be used on 2 channel organs, with the appropriate console connector kit. The 720 is a medium power cabinet with a normal drum and horn in it’s rotary channel, and a two way full range stationary channel. While better suited to having low frequencies in it’s rotary channel due to […]
2 Channel Pro-Line cabinet reportedly similar to the model 720. Amplifier Type Solid State Output Power 90 Watts ? Drum 1 – 10″ Speaker Horn 1 – Compression Driver Speeds 3 Speed (Chorale/Stop/Tremolo) Interface 11 Pin
This model was designed to be used on multichannel organs, with the appropriate console connector kit. The 740 is a high power cabinet with a normal Rotosonic drum and horn in it’s rotary channel, two way full range stationary channel, and two auxiliary channels. Amplifier Type Solid State Output Power 220 Watts total across 4 […]
This model was designed to be used with a combo preamp for portable organs and keyboards. It features a standard configuration of speakers driven by a moderate power amplifier. It’s horn, motors, and rotors are the same as those used in 122 and 147 cabinets of the same era. Amplifier Type Solid State Output Power […]
The 760N is exactly the same as a 760 and 770 electronically. These cabinets were made at the “Hammond” factory in Anvers, Belgium following Hammond’s acquisition of Leslie. I gather the design change was to make this cabinet more appealing to European customers. Amplifier Type Solid State Output Power 90 Watts Drum 1 – 15″ […]
This model was designed to be used with single channel organs. It features a standard configuration of speakers driven by a moderate power amplifier. It’s horn, motors, and rotors are the same as those used in 122 and 147 cabinets of the same era. Amplifier Type Solid State Output Power 90 Watts total Drum 1 […]
The 715, 815, HL-722, and HL-822 are all deviations of the same “guts” – each model simply bearing a different cabinet. The service manual and parts are the same for all four models. This model was designed to be used with a combo preamp for portable organs and keyboards. It features both a rotary channel […]
This model was designed to be used with a combo preamp for portable organs and keyboards. It has only one rotor and has no tweeter so the tone will be somewhat dull as compared to 2 rotor Leslies. Despite having a lower model number, this is the 11 pin version of an 825. Amplifier Type […]
This model was designed to be used with a combo preamp for portable organs and keyboards. It has only one rotor and has no tweeter so the tone will be somewhat dull as compared to 2 rotor Leslies. It is, as the model number suggests, the solid state version of the old 25/125 model. Amplifier […]
The 825U is the same as the 825, but it has a “Utility” finish for concealed installations. Amplifier Type Solid State Output Power 70 Watts Drum 1 – 12″ Speaker Horn None Speeds 3 Speed (Chorale/Stop/Tremolo) Interface 11 Pin
This model was designed to be used with a accordions and other “complex voice” keyboards. The cabinet it’s self is taken from the 825 and it has only one rotor which is different from most in that it has TWO scoops. It also has no tweeter so the tone will be somewhat dull as compared […]
The 900 is a single channel Leslie with built in reverb and a 2 piece Pro-Line portable cabinet. it was introduced in 1969 and was the first of what would become known as the Pro-Line Leslies. At the time of it’s introduction it was simply known as the PRO 900. This model was designed to […]
The 900U is a model 900 in a “Utility” cabinet for concealed installations. Amplifier Type Solid State Output Power 100 Watts Drum 1 – 15″ Speaker Horn 1 – Compression Driver Speeds 3 Speed (Chorale/Stop/Tremolo) Interface 9 Pin
Introduced in 1972, the 910 was nearly identical to the PRO900. See the model 900 page for more information. Amplifier Type Solid State Output Power 100 Watts Drum 1 – 15″ Speaker Horn 1 – Compression Driver Speeds 3 Speed (Chorale/Stop/Tremolo) Interface 9 Pin
Introduced in 1971, the 925 is a single channel Leslie with a Pro-Line portable cabinet. This model was designed to be used with a combo preamp for portable organs and keyboards. It features an “Aux” channel which speaks through stationary 6×9 speakers and can be turned on and off remotely (via the combo preamp) Amplifier […]
The 950 is a single channel Leslie with built in reverb and a Pro-Line portable (if you can call something this big portable) cabinet. This model was designed to be used with a combo preamp for portable organs and keyboards. The sides of the cabinet contained “Black Light” florescent tubes which could be turned on, […]
The HL-422 was made exclusively for use with the Hammond B3000. Amplifier Type Solid State Output Power 140 Watts total Drum Rotosonic Horn 1 – Compression Driver Speeds 3 Speed (Chorale/Stop/Tremolo) Interface 11 Pin
The 715, 815, HL-722, and HL-822 are all deviations of the same “guts” – each model simply bearing a different cabinet. The service manual and parts are the same for all four models. This model was designed to be used with the Hammond B-3000 organ, as it’s cabinet matches the B-3000’s case. Amplifier Type Solid […]
The 715, 815, HL-722, and HL-822 are all deviations of the same “guts” – each model simply bearing a different cabinet. The service manual and parts are the same for all four models. This model was designed to be used with the Hammond B-200 organ. It is the same internally as a model 715 but […]
Special model made exclusively for use with the model X-77 Hammond console. Amplifier Type Solid State Output Power 200 Watts total Drum Rotosonic Horn 1 – Compression Driver Speeds 2 Speed (Chorale/Tremolo) Interface Custom
Special model made exclusively for use with the model X-77 Hammond console. Amplifier Type Solid State Output Power 200 Watts total Drum Rotosonic Horn 1 – Compression Driver Speeds 2 Speed (Chorale/Tremolo) Interface Custom
Next step up following the exhaustion of their supply of 25 and 125 cabinet, the MkII was a replica of the slightly larger 142/145 size cabinet. Covered in a polymeric coating of the same material used for pickup truck bed liners it has a thick hide that is nearly impervious. Amplifier Type Solid State Output Power 200 […]