Unit should include a special crossover assembly, foot switch, and adaptor to connect it to a guitar amplifier. Unlike the Model 16 and Model 18 Leslie, the Fender Vibratone came in at least 2 different cabinet styles depending on it’s vintage. The early unit looked like the Leslie 16 with the only difference being that […]
Designed “for the Thomas organ”, this small cabinet features an 8 inch speaker firing into a rotating drum not unlike the units found in the Vibratone, 16, and 18 models. Unlike those models, this one likely was controlled via dedicated tabs on the organ it’s self and so had no foot switch from the factory. […]
Unit should include a special crossover assembly, foot switch, and adaptor to connect it to a guitar amplifier. See our schematics section for details. Amplifier Type None Output Power N/a Drum 1 – 10″ Speaker Horn None Speeds 2 Speed (Chorale/Tremolo) Interface Custom
Unit should include a special crossover assembly, foot switch, and adaptor to connect it to a guitar amplifier. See our schematics section for details. 16 and 18 are identical except for the fact that the model 18 has a full range JBL speaker. These units are the same as the Fender Vibratone cabinet. Amplifier Type […]
This model is actually comprised of a pair of cabinets, each with the appearance of the image to the left. This model is designed for use with most amplified instruments, but mainly for electro-pianos (IE Rhodes, Wurlitzer) It has no rotors, but does features variable vibrato speed. It uses a “Space Generator” to create this […]
This model is actually comprised of a pair of cabinets, each with the appearance of the image to the left. This model is designed for use with 2 channel organs and electro-pianos (IE Rhodes, Wurlitzer) It has no rotors, but does features variable vibrato speed. It uses a “Space Generator” to create this effect, and […]
Special model made exclusively for use with the model J, K and N Gulbransen console. Tibia channel tremolo switched on and off by switching between rotosonic drum and stationary 6×9 speaker. Amplifier Type 4 Channel Vacuum Tube Output Power 65 Watts total Drum Rotosonic Horn None Speeds 1 Speed (Stop/Tremolo) Interface Custom
Special model made exclusively for use with some later revisions of Gulbransen consoles J, K, and N. Tibia channel switched between one 6×9 in the fast drum and a stationary 6×9. Isomonically separated complex channel switched between 2 additional 6×9 speakers in the fast drum, and two stationary 6x9s. –Special Thanks to Jimmy Williams for […]
Special model made exclusively for use with some Gulbransen consoles and Lowrey H-1 and H-25 series organs. The Celeste effect is provided by a “Space Generator” It is designed to be used in conjunction with the model 103. Amplifier Type 4 Channel Vacuum Tube Output Power 65 Watts total Drum Rotosonic Horn Speeds 1 Speed […]
Special model made exclusively for use with some Gulbransen consoles and Lowrey H-1 and H-25 series organs. One channel has a controllable Drum (Fast and Slow) the other channel switches between a fast turning drum, and a Celeste effect provided by a “Space Generator” fed into stationary 6″x9″ speakers. It is designed to be used […]
Special model made exclusively for use with the Gulbransen Model F Church Organ (pedal channel). One single 15″ speaker; no rotary elements. — Special thanks to Jimmy Williams for the information. Amplifier Type 1 Channel Vacuum Tube Output Power 40 Watts Drum None Horn None Speeds None Interface Custom
Special model made exclusively for use with the Gulbransen Model F Church Organ (great and swell manuals – one cabinet for each). Isomonically split and phase-mixed complex voices were carried by four channels via stationary 10″ speakers. Flute channel was a 10″ speaker firing into a wooden lower rotor (brake/fast). The cabinet had 5 channels […]
The 202 was designed exclusively for use with Wurlitzer organs. Amplifier Type 4 Channel Vacuum Tube Output Power 64 Watts Drum Dual Rotosonic Horn None Speeds 2 Speed (Chorale/Tremolo) Interface Custom
The 202S was designed exclusively for use with Wurlitzer organs. As such it has some unusual speed and channel switching schemes. One rotor is set up for fast speed, while the other can be switched from fast to slow. These controls are semi-integrated with some channel switching as well as a “Space Generator”. It is […]
Special model made exclusively for use with the model CP (AKA F204) Gulbransen console. Tibia channel switched between one 6×9 in the lower drum and a stationary 6×9, while the Complex channel switched between two 5x7s in the upper drum, and a stationary 5×7. Piano and Bass were two additional stationary channels. — Special Thanks […]
The 205 was a derivation of the model 202, but designed for use with an assortment of different manufacturers organs. Amplifier Type 4 Channel Vacuum Tube Output Power 65 Watts total Drum Dual Rotosonic Horn None Speeds Interface Custom
The 212S was designed exclusively for use with Wurlitzer organs. As such it has some unusual speed and channel switching schemes. One rotor is set up for fast speed, while the other can be switched from fast to slow. These controls are semi-integrated with some channel switching as well as a “Space Generator”. It is […]
The 257 is used with the 258 and was designed exclusively for use with Thomas organs. Below is a description by Harvey Olsen from the “HamTech Mailing List”: “The 257/258 dual cabinet system was actually for selected, high-end, 60s vintage Thomas Organs. The 257 was used for the flute and tibia voices. It’s essentially a […]
he 258 is used with the 257 and was designed exclusively for use with Thomas organs. Below is a description by Harvey Olsen from the “HamTech Mailing List”: “It is the “complex-wave” cabinet for the above system [257/258 pair]. It has two 147-type power amps (with 9-pin inputs) that drive the 15″ bass, and two […]
The 300 was designed exclusively for use with Thomas organs. Amplifier Type 4 Channel Vacuum Tube Output Power 65 Watts total Drum Horn Speeds Interface Custom
The 301 was designed exclusively for use with Thomas organs. Amplifier Type 4 Channel Vacuum Tube Output Power 65 Watts total Drum Horn Speeds Interface Custom
The 350 was designed exclusively for use with Conn organs. Amplifier Type 4 Channel Vacuum Tube Output Power 65 Watts total Drum 1 – 10″ Speaker Horn None Speeds Interface Custom
This model was designed to be used on many different manufacturer’s organs, with the appropriate console connector kit. The 610 features a normal Rotosonic drum and a second drum with 2 speakers, in addition to it’s two stationary speakers. Amplifier Type 4 Channel Vacuum Tube Output Power 65 Watts total Drum Dual Rotosonic Horn None […]
Special model made exclusively for use with the model X-77 Hammond console. Amplifier Type Solid State Output Power 200 Watts total Drum Rotosonic Horn 1 – Compression Driver Speeds 2 Speed (Chorale/Tremolo) Interface Custom
Special model made exclusively for use with the model X-77 Hammond console. Amplifier Type Solid State Output Power 200 Watts total Drum Rotosonic Horn 1 – Compression Driver Speeds 2 Speed (Chorale/Tremolo) Interface Custom
Next step up following the exhaustion of their supply of 25 and 125 cabinet, the MkII was a replica of the slightly larger 142/145 size cabinet. Covered in a polymeric coating of the same material used for pickup truck bed liners it has a thick hide that is nearly impervious. Amplifier Type Solid State Output Power 200 […]